Thinking of buying a brand new Bag Taper, because yours isn't cutting as efficiently as it did when it was brand new? All you may need is a replacement blade. This blade is honed to a razor sharp edge on one side. Simply follow the instructions below and you'll have a brand new edge for cutting. Can be used on ET-605K,ET-606STK,ET-808K.

To replace a dull bag taper blade:

To replace a dull bag taper blade:

• Put the bag taper on a table surface.
• Hold the top with one hand.
• Use a flat bladed or standard screwdriver to loosen the screw holding the current blade and housing to the side of the machine. You may be able to loosen and remove the screw by hand.
• As the screw is coming out, the entire housing including the blades will come off of the body of the taper completely. Please take a moment to remember how it goes back on. Consider taking a picture with a camera, in case it is confusing.
• Even though the edges are dull on the used blade still take great care to handle any of the blades gingerly. They can still cut you. Consider putting some masking tape over the edges so that no one gets cut, when you discard the used blade.
• Take your brand new tape cutting blade and place it where the dull blade just came from.
• Reassemble to housing and tigh....