Each 4" Sealer Repair Kit for 4" Impulse Hand Sealer comes with 2 heating elements and 2 Teflon strips. It is always a smart idea to have more than one replacement heating element wires and more then one Teflon strip on hand so that production never misses a beat.

 

Please follow these instructions for replacing element wires and teflon covers and insulator strip.

1. Unplug unit.

2. Unscrew (2 philips head screws) and remove cutter bar.

3. Unscrew chrome side plate and remove teflon cover. This exposes element wire.

4. Unhook old wire from post. Remove insulator strip below wire. Replace adhesive strip cover all exposed metal.

5. Reattach new element wire, cover with new teflon, replace side plate and cutter bar.